Get started for free

Managing turnovers

Vacation home cleaning: opening and closing for the season

· 7 min read

vacation home cleaning

Key takeaways

  • A vacation home needs three kinds of clean: a deep clean when you open for the season, a turnover clean after every stay and a closing clean before it sits empty.
  • Agree in writing what each clean includes, because linen, consumables, windows and appliances are often outside a basic visit.
  • Dated photos, the time spent and a short list of problems after each visit let you check the work without travelling.

Picture a cottage you let from spring to autumn, three hours' drive from your home. Between guests you cannot see what was done, and in winter nobody sees the place at all. Good vacation home cleaning means knowing what each visit should cover, when to schedule the bigger jobs and how to confirm the result from a distance.

This guide covers what a clean includes, how to open and close the property for the season and how to run each departure. It also explains how to choose and brief a cleaner you cannot supervise, and how to check the work remotely.

What does vacation home cleaning cover between stays?

A turnover clean usually covers floors, surfaces, the kitchen and the bathrooms, and in some arrangements the beds and linen as well. The scope differs from one cleaner to the next, so agree in writing whether linen, laundry and consumables are included before the first visit.

Oven cleaning, air-conditioning filters, windows and shutters are often separate jobs. How often they are needed depends on the property and its maintenance instructions, so ask for the detail before you agree anything. During busy weeks, empty and wipe the fridge whenever guests leave food behind. To avoid the slips that pull ratings down, read our guide to cleaning mistakes that lead to bad reviews.

Opening and closing a vacation home for the season

Opening means bringing a shut-up property back to guest-ready condition, and closing means leaving it clean, dry and safe until the next season. Both are bigger jobs than a normal turnover, so book them as separate visits with more time.

Opening: from shut-up to guest-ready

Start with air, water and a quick inspection, then move on to the deep clean. Our guide to deep seasonal cleaning for a rental covers the detail, and the list below gives the order of work.

  • Air and flush: open the windows, run every tap and flush every toilet so water that has stood for months runs clear.
  • Check: look for damp, pests, leaks and dead bulbs, and test smoke alarms. The pre-arrival technical checks give a useful list.
  • Deep clean: wash inside cupboards, the oven, the fridge, windows and mattress covers, then wash any linen that was stored.

Closing: leaving the property safe until next season

Before the property sits empty, clear the fridge and freezer, clean them and leave the doors ajar. Empty every bin, wash and dry all linen completely before storing it, and remove perishable food from the cupboards. Follow the property's own instructions for water, heating and electricity, and take dated photos of each room so you know the condition you left it in.

Too far away to open and close the house yourself? Find a cleaner near your vacation home, with no commission on the visits you book.

Find a cleaner

What changes between opening, turnovers and closing?

The cleaning itself is similar, but the focus and the time needed are different at each stage. This table is a simple way to plan which jobs belong to which visit.

MomentMain focusTypical extras
OpeningAir the rooms, check for damp and pests, deep cleanRun taps, wash stored linen, clean windows and appliances
TurnoverReset the property for the next guestLinen change, restock consumables, photograph any damage
ClosingLeave it clean, dry and secureEmpty and clean the fridge, store dry linen, final photos

Seasonal tasks, only when due. CleanClac is designed to show spaced tasks, such as oven or filter cleaning, only on the day they are due, drawn from a library of more than 250 illustrated tasks. More details

How do you run the cleaning at each departure?

Follow the same order every time, from the first look around to the last restock. A fixed routine means nothing depends on who is cleaning that day, which matters when you are not there to supervise.

  1. Strip and inspect: remove used linen, empty the bins, look for forgotten items and damage, and photograph anything unusual before you start.
  2. Clean from top to bottom: do the bedrooms, kitchen and bathrooms, working from high surfaces down to low ones.
  3. Floors last: vacuum and wash the floors on the way out so nothing is walked back in.
  4. Reset: wipe door handles, switches, remote controls and locks, make the beds with clean linen and restock the consumables.

As a guide, allow about 1.5 to 2 hours for a studio or small flat and 4 hours or more for a large house, including linen and the reset. For a same-day turnover in a standard flat, leave a gap of around 3 hours between check-out and check-in so the clean never runs into the arrival.

Good to know: keep a full spare set of linen on site, so a late check-out or a stained sheet does not hold up the next arrival.

How do you check the result without being there?

What to ask your cleaner to send

Ask for a short record after every visit: photos of each room, the time spent and any problems found. Photos show the visible state of the property, and the time spent tells you whether the visit matched the job you agreed. Keep the original files together with the messages, because they back each other up if a guest later disputes the condition. Problems reported early can be fixed before the next arrival.

Briefing a cleaner you cannot supervise

Describe the property in writing: rooms, beds, bathrooms and what you expect at each visit. Compare at least three cleaners on recent reviews, price and terms, including notice period and who supplies the products. Agree what to do if something is missing or broken, and name a backup for when your usual cleaner is unavailable. Leave a basic kit on site, and use our list of essential cleaning products for a short-term rental to decide what it should contain.

Already cleaning vacation homes? Get known by hosts near you and follow each visit, photos included, from your phone.

Become a cleaner

Moving from paper to a checklist your cleaner actually follows

A paper list left on the kitchen table is easy to skip and impossible to check from a distance. CleanClac lets you create the cleaning schedule automatically from your booking calendar or property management software, so every departure has a visit attached. You can read more about the cleaning schedule. The checklist is designed to be followed task by task on iPhone or Android, in seven languages.

  1. Add your property and connect the calendar: link your Airbnb, Booking, Vrbo or Google calendar, or your property management software, so the visits appear on their own.
  2. Build the checklist for that property: pick tasks from the illustrated library, and set the seasonal ones to appear only when they are due.
  3. Review each visit: check the timestamped photos, the real duration and the condition rating out of 5 after every clean.

The same checklist can cover your opening and closing visits as well as the turnovers in between. You can try it on a single property without paying: your first property is free, with no time limit and no bank card.

Your questions

How often should a vacation home be cleaned?

A full clean is needed after every departure and before the next arrival. Bigger jobs such as the oven, filters and windows can be spaced out, depending on the property and its maintenance instructions. Add a deep clean when you open for the season and a closing clean when you shut up.

Does the cleaning fee have to be included in the nightly rate?

No, not necessarily. You can build the cleaning into the rate or charge it as a separate fee, depending on what the booking platform allows. Check the platform's own rules on displaying fees, and tell guests what the fee covers.

How long should I leave between a departure and an arrival?

As a guide, leave around 3 hours in a standard flat for a same-day turnover. A studio usually takes about 1.5 to 2 hours of cleaning and a large house 4 hours or more. Allow extra time if linen or restocking is part of the visit.

How much does vacation home cleaning cost?

It depends on the size of the property, how many beds there are and what is included. A clean that covers linen and consumables will cost more than one that does not. Ask for written quotes based on the same list of tasks so you can compare them fairly.

Which products should a cleaner use in a holiday let?

There is no single list, so confirm the products with your cleaner before the first visit. Follow the manufacturer's care instructions for appliances and surfaces, because the wrong product can damage them. Leave a basic kit on site so the cleaner is never short.

Jonathan Lalinec

Written by Jonathan Lalinec

Jonathan Lalinec is the founder of CleanClac. He compares and automates tools for short-term rentals.

Published on November 16, 2026 · Updated on November 16, 2026

Move from theory to practice.

One property free to put all of this in place, for as long as it takes.

Get started for freeSee pricing